JENOSEEL
FREQUENTLY ASKED QUESTIONS
A selection of the most common questions, but please contact us for further information.
How do I prepare a rusty surface? As Jenoseel actually uses rust, it does not need
such a high degree of preparation as conventional products. Thoroughly scrape to
remove all heavy build-
Do I need to shot blast? Very rarely. Only if the structure is badly corroded, when blasting may be quicker than hand preparation. If blasting, SA2 standard is adequate for Jenoseel.
Can Jenoseel be applied over thick rust? No! Whilst Jenoseel actually uses rust,
for long-
How is Jenoseel applied? Very easily, stir very thoroughly and apply by brush.
Can Jenoseel be sprayed? Not recommended. Jenoseel is designed to penetrate into rust and spraying can tend to ‘lay on’.
What is the coverage? Depending on profile of surface, average 8-
How many coats? Two
Why? Just one coat of any product may mean that the ‘peaks’ are not adequately covered.
How long between coats of Jenoseel Primer? 10-
How long to apply finish coats? See ‘How to Use’ -
How do I clean my brushes? Use our No. 4 Cleaner. For small areas, use disposable brushes.
What top coats? Jenoseel may be overcoated with most products. We can supply a full range of top coats to suit most applications. Please seek advice.
How long does Jenoseel last? Depends on situation, thoroughness of preparation, top
coats etc. Because Jenoseel stabilises existing rust and actively fights future corrosion,
a Jenoseel system will give longest possible life in most situations. Typical external
structures 10-
How do I obtain Jenoseel? See Ordering page.
What is delivery time? Usually 2-